Installation, assembly or repair videos

How to install an 36v lithium electric kit on a hybrid bicycle

 In this video a step-by-step video guides you through the complete installation of an electric kit on a hybrid bicycle purchased from Canadian Tire. All points are covered with respect to the installation. The kit that is installed is a 36v lithium kit. To view the video click on the link; How to install a 36v lithium electric kit on a hybrid bicycle from Canadian Tire.

How to assemble our 48v20ah electric scooter model 'switch100'

 In this video you will see the complete assembly of the Switch100 model coming out of the box to the finish. To see the video click on the following link; How to assemble the 48v20ah Switch100 electric scooter.

How to assemble a 48v SLA battery pack for any scooter

 In this video we demonstrate how to assemble a 48v SLA battery pack. This is helpful, if you are in a situation, where some of the wires have come off, and you don't have the knowledge on how to complete the circuit. This knowledge applies to any system; 24v, 36v & 48v. To see the video click on the following link; How to assemble a 48v SLA battery pack.

How to change the back tire of our electric scooter model switch100

In this video we demonstrate how to change the back tire of our 48v20ah lithium electric scooter, model Switch100. You would follow the same procedure in order to change the back brakes, a flat or the 500w motor. To see the video click on the following link; How to change the back tire of our electric scooter model switch100.

How to check for correct polarity of battery pack and charger

If you purchased a used electric scooter, you must check the battery polarity before charging the batteries. Before you charge your SLA battery pack, you need to make sure that the battery and charger are of the same polarity. If not, if your battery pack has the wrong polarity, your charger will burn up. To see the video click on the following link; How to check battery polarity.